Highway engineering: Pavements, materials and control of quality / Athanassios Nikolaides.
Tipo de material: TextoEditor: Boca Raton (USA) : CRC Press, 2015Descripción: xxxix, 883 p.: il.; 26 cmISBN: 9781466579965 (hardback : acidfree paper)Tema(s): PAVIMENTOS -- MANUALES | TECNOLOGÍA E INGENIERÍAClasificación CDD: 625.7Tipo de ítem | Ubicación actual | Colección | Signatura | Info Vol | Copia número | Estado | Fecha de vencimiento | Código de barras | Reserva de ítems |
---|---|---|---|---|---|---|---|---|---|
LIBRO - MATERIAL GENERAL | Biblioteca Jorge Álvarez Lleras Fondo general | Colección / Fondo / Acervo / Resguardo | 625.7 N693h (Navegar estantería) | Ej. 1 | 1 | Disponible | 023992 | ||
LIBRO - MATERIAL GENERAL | Biblioteca Jorge Álvarez Lleras Fondo general | Colección General | 625.7 N693h (Navegar estantería) | Ej. 2 | 2 | Disponible | 027903 |
Navegando Biblioteca Jorge Álvarez Lleras Estantes, Ubicación: Fondo general, Código de colección: Colección General Cerrar el navegador de estanterías
625.7 H557g Accidentes de tránsito terrestre: | 625.7 I46 Ingeniería de carreteras / | 625.7 I46 2a ed. Ingeniería de carreteras / | 625.7 N693h Highway engineering: | 625.7 R758m Manual de capacidad de carreteras: | 625.7 T772h Highway Capacity Manual: | 625.7 T772h Highway Capacity Manual: |
Incluye bibliografía e indices
Soils
The formation of soils
Soil fractions
Physical properties of soils
Basic soil tests
Soil classification
Soil bearing capacity tests
Plate bearing test – modulus of reaction (k)
Resistance R value test
Elastic modulus and resilient modulus of soils
Compaction of soil materials on site
Density tests in situ
References
Aggregates
General
Crushed aggregates
Natural aggregates
Slags
Mine waste
Demolition materials
Artificial aggregates
Recycled (pulverised) aggregates
Aggregate sizes
Aggregate tests
Geometrical properties determination tests
Physical properties determination tests
Chemical properties tests
Petrographic description of aggregates
Blending two or more aggregates
References
Bitumen, bituminous binders and anti-stripping agents
General
Natural asphalt
Tar
Manufactured bitumen
Cut-back and fluxed bituminous binders
Bitumen emulsions
Anti-stripping agents
Modified bitumens and special bitumens
Handling of bituminous binders
References
Laboratory tests and properties of bitumen and bitumen emulsion
General
Penetration test
Softening point test (Left)
Penetration index
Ductility test
Force ductility test
Elastic recovery test
Viscosity
Fraass breaking point
Heukelom chart – bitumen test data chart
Resistance to hardening tests
Flash and fire point – cleveland open cup method
Solubility test
Tensile test
Cohesion with pendulum test
Storage stability test
Mineral matter or ash in asphalt materials
Capillary-stoppered pycnometer test for determination of density and specific gravity of bitumen
Determination of water in bitumen by distillation method
Bitumen emulsion tests
Mechanical properties of bitumen
Performance-graded asphalt binder tests
References
Hot asphalts
General
Determination and role of asphalts
Characteristic types of asphalts
Asphalt concrete
AC for very thin layers
Porous asphalt
HRA in accordance to European standards
Stone mastic asphalt
Mastic asphalt
Soft asphalt
High-modulus asphalts
Warm mix asphalts
Other types of asphalts
References
Cold asphalts
General
Characteristic types of cold asphalts
Dense-graded cold asphalts
Open-graded cold asphalts
Production of cold asphalt mixtures
Laying and compaction of cold asphalt mixtures
Quality control of cold asphalt mixtures
Cold asphalts for slurry surfacing
References
Annex 6.A
Coating test
Annex 6.B
Modified Marshall mix design for dense- graded cold asphalt (DGCA)
Specimen production and Marshall testing
Annex 6.C
Soaking test – capillary water absorption test
Fundamental mechanical properties of asphalts and laboratory tests
General
Stiffness modulus of asphalts
Types of loading
Determination of stiffness modulus and other moduli
Prediction of asphalt stiffness
Permanent deformation of asphalts
Fatigue of asphalts
References
Production, transportation, laying and compaction of hot mix asphalts
General
Types of asphalt production plants
Batch plants
Drum-mix plants
Transportation of hot mix asphalts
Laying/paving
Compaction of asphalts
References
Annex .A
Quality control of production and acceptance of asphalts
General
Sampling
Methods of material sampling
Inspection and testing of incoming constituent materials and delivered product
Acceptance of delivered and laid asphalt
Methods for determination of binder content
References
Layers of flexible pavement
General
Subgrade
Capping layer
Sub-base course
Base course
Asphalt layers
Poisson’s ratio of paving and subgrade materials
References
Methods determining stresses and deflections
References
Traffic and traffic assessment
General
Axle loads
Vehicle classification
Overloaded vehicles
Measurement of vehicle axle load
Contact area and pressure
The concept of equivalent standard axle loading –equivalency factors for flexible pavements
Equivalency factors for rigid pavements
References
Flexible pavement design methodologies
General
Design criteria for flexible pavements
Asphalt institute pavement design methodology
AASHTO pavement design methodology
UK flexible pavement design methodology
AUTh flexible pavement design methodology
Shell flexible pavement design methodology
French flexible pavement design methodology
Australian flexible pavement design methodology
The Nottingham University/mobil design method
Other pavement design methods
AASHTO mechanistic–empirical pavement design guide
References
Rigid pavements and design methodologies
General
Subgrade and layers of rigid pavements
Consideration of stresses that developed on a concrete slab
Cracking of fresh and hardened concrete
Joints in concrete pavements
Contraction joints
Expansion joints
Sealants and joint fillers
Warping joints
Joints attributed to interruption of works
The function of steel reinforcement
Amount and position of reinforcement
Jointed reinforced concrete pavements
Continuously reinforced concrete pavements
Pre-stressed concrete
Fibre-reinforced concrete
Rigid pavement design methodologies
UK rigid pavement design methodology
AASHTO rigid pavement design methodology
Australian rigid pavement design methodology
MEPDG for rigid pavements
Construction of rigid pavements
References
Pavement maintenance rehabilitation and strengthening
General
Terminology
Maintenance, rehabilitation and pavement life
Typical surface distresses in flexible pavements
Cracking in flexible pavements
Retardation of reflective cracking treatments and asphalt reinforcement techniques
Surface distortions in flexible pavements
Disintegration of flexible pavements
Loss of surface skid resistance
Typical distresses in rigid pavements
Cracking of rigid pavements
Surface deformation in rigid pavements
Disintegration of rigid pavements
Loss of surface skid resistance
Surface dressing
Pavement strengthening
Asphalt overlay design methods over flexible pavements
Asphalt overlay over rigid pavement
Concrete overlay over rigid or flexible pavement
AASHTO overlay design method
References
Pavement evaluation and measurement of functional and structural characteristics
Pavement evaluation
Functional evaluation by visual condition survey
Functional evaluation by devices measuring surface characteristics
Structural evaluation of pavements
References
Pavement management
General
Terms – definitions
Purpose of pavement management
Levels of pavement management analysis
Pavement management components
Software for pavement management
Pavement recycling
General
What pavement recycling is offering
Pavement recycling methods
Cold milling (planning)
Hot recycling
Cold recycling
Evaluation of RA
Suitability of RA
Hot recycling mix design
Cold recycling mix design
Pavement design using recycled asphalt
Recycling of rigid pavements
References
Index
Cubre los principios básicos de la gestión de pavimentos, destaca los recientes avances, y detalla los últimos estándares y técnicas de la industria en el mercado mundial. La utilización de la autora más de 30 años de docencia, investigación y experiencia en consultoría, este texto se centra en el diseño, construcción, mantenimiento y gestión de pavimentos para carreteras y autopistas, y cubre los principales temas en la ingeniería de carreteras. El autor integra materiales de pavimento, ensayos de materiales para la aceptabilidad y la garantía de calidad, diseño de la mezcla asfáltica, diseño flexible y rígido pavimento, la construcción, el mantenimiento y el fortalecimiento de los procedimientos, el control de calidad de la producción y la aceptación de los asfaltos, evaluación pavimento, plantas de asfalto, y el reciclaje de pavimento. También incluye tanto de Europa y América (ASTM y AASHTO) las normas y la práctica, y está ampliamente ilustrado con referencias, tablas, gráficos, diagramas y fotografías.
No hay comentarios en este titulo.